Acrypol Flexiglass CSM 255gsm Matting

Acrypol Flexiglass CSM 255gsm Matting is the reinforcement matting of the Acrypol Flexiglass product range.

Best Uses

Acrypol Flexiglass® is a versatile GRP resin roof system designed for new and existing roofs. Flexiglass® can be applied to almost any roof surface such as felt, asphalt, concrete and OSB3 TG board as a new roof covering. Flexiglass® is a totally seamless, highly flexible roof system ideal for any sized job.

This product is the reinforcement matting to be sandwiched between two layers of Flexiglass Resin. Provides high mechanical strength.

Application

Pre-Install

• Make sure the substrate is stable, clean and dry. Avoid moisture at all times. Never apply over wet substrates. Do not apply below 5°C or above 30°C.

Priming

• Agitate Acrypol Flexiglass Primer thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly.
• Apply 500g (350ml) per m2 to substrate using a roller
• Leave Acrypol Flexiglass Primer to set

Trimming

• Install trims to substrate if required. Trims do not require priming.

Bandage Joints

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Bandage joints using Acrypol Flexiglass Jointing Bandage if required
• Apply 500g (350ml) per m2 of Acrypol Flexiglass Top Coat over reinforcement using a roller. Then consolidate using a bubble buster.
• Leave Acrypol Flexiglass Top Coat to set
  

Resin Coat / Matting

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 500g (350ml) per m2 to the primed surface using a roller
• Apply Acrypol Flexiglass CSM 225gsm Matting over wet resin, then consolidate using a bubble buster
• Add 500g (350ml) Acrypol Flexiglass Top Coat over the matting. Work in using a roller
• Leave Acrypol Flexiglass Top Coat to set

Final Resin Top Coat

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 700g (500ml) per m2 as a topcoat to the surface using a roller as the final top coat layer
• Leave final Acrypol Flexiglass Top Coat to set