Acrypol Flexiglass Jointing Bandage

Acrypol Flexiglass Jointing Bandage is the jointing bandage component of the Acrypol Flexiglass product range.

Best Uses

Acrypol Flexiglass® is a versatile GRP resin roof system designed for new and existing roofs. Flexiglass® can be applied to almost any roof surface such as felt, asphalt, concrete and OSB3 TG board as a new roof covering. Flexiglass® is a totally seamless, highly flexible roof system ideal for any sized job.

This product is the jointing bandage to joint seams and tape joints on a Flexiglass roof. The strands of the glassfibre are held together by an emulsion binder to form a mat.

Application

Pre-Install

• Make sure the substrate is stable, clean and dry. Avoid moisture at all times. Never apply over wet substrates. Do not apply below 5°C or above 30°C.

Priming

• Agitate Acrypol Flexiglass Primer thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly.
• Apply 500g (350ml) per m2 to substrate using a roller
• Leave Acrypol Flexiglass Primer to set

Trimming

• Install trims to substrate if required. Trims do not require priming.

Bandage Joints

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Bandage joints using Acrypol Flexiglass Jointing Bandage if required
• Apply 500g (350ml) per m2 of Acrypol Flexiglass Top Coat over reinforcement using a roller. Then consolidate using a bubble buster.
• Leave Acrypol Flexiglass Top Coat to set
  

Resin Coat / Matting

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 500g (350ml) per m2 to the primed surface using a roller
• Apply Acrypol Flexiglass CSM 225gsm Matting over wet resin, then consolidate using a bubble buster
• Add 500g (350ml) Acrypol Flexiglass Top Coat over the matting. Work in using a roller
• Leave Acrypol Flexiglass Top Coat to set

Final Resin Top Coat

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 700g (500ml) per m2 as a topcoat to the surface using a roller as the final top coat layer
• Leave final Acrypol Flexiglass Top Coat to set