Acrypol Flexiglass Top Coat Resin

Acrypol Flexiglass Top Coat Resin is the top coat resin component of the Acrypol Flexiglass product range.

Best Uses

Acrypol Flexiglass® Resin is a high quality dark grey liquid topcoat based on isophthalic unsaturated polyester resin that is specifically designed to be used as part of the Flexiglass® GRP Multi Surface Overlay System.

To be used in conjunction with Acrypol Flexiglass® Primer to form a flexible Class 1 EXT. F.A.A. fire retardant system for use on external flat roofs.

Application

Pre-Install

• Make sure the substrate is stable, clean and dry. Avoid moisture at all times. Never apply over wet substrates. Do not apply below 5°C or above 30°C.

Priming

• Agitate Acrypol Flexiglass Primer thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly.
• Apply 500g (350ml) per m2 to substrate using a roller
• Leave Acrypol Flexiglass Primer to set

Trimming

• Install trims to substrate if required. Trims do not require priming.

Bandage Joints

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Bandage joints using Acrypol Flexiglass Jointing Bandage if required
• Apply 500g (350ml) per m2 of Acrypol Flexiglass Top Coat over reinforcement using a roller. Then consolidate using a bubble buster.
• Leave Acrypol Flexiglass Top Coat to set
  

Resin Coat / Matting

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 500g (350ml) per m2 to the primed surface using a roller
• Apply Acrypol Flexiglass CSM 225gsm Matting over wet resin, then consolidate using a bubble buster
• Add 500g (350ml) Acrypol Flexiglass Top Coat over the matting. Work in using a roller
• Leave Acrypol Flexiglass Top Coat to set

Final Resin Top Coat

• Agitate Acrypol Flexiglass Top Coat Resin thoroughly with the least amount of turbulence.
• Add required amount of Acrypol Flexiglass Catalyst paste to primer, depending on the temperature and quantity needed. (See System Info - Catalyst Dosage Mixing Guide). Stir thoroughly. 
• Apply 700g (500ml) per m2 as a topcoat to the surface using a roller as the final top coat layer
• Leave final Acrypol Flexiglass Top Coat to set