£9.95 delivery on orders excluding certain products & postcodes *
Coo-Var Matt Black
SKU
ID23703
UN1263 (Class: 3, Pk Grp: III)
A quick drying solvent based non reflective finish for wood, metal, ironwork, plaster etc. use internally and externally.
Available in 1, 2.5 and 5 Litres
From
£23.22
£19.35
In stock
Only %1 left
Product Description
Coo-Var Matt Black is a solvent based quick drying non reflective finish to wood, metal, ironwork, plaster and many other substrates, internally and externally.
Best Uses
Coo-Var Matt Black is ideal for Tudor style beams, photographic work, chalk boards and anywhere a non-reflective surface is required. Not suitable for canvas roller chalk boards. Suitable for interior and exterior use.
Application
Ensure all surfaces are clean, dry and free from grease, oil and any other contaminates. Use Coo-Var Masonry Stabiliser on unstable brick, screed or plaster prior to painting. Existing painted surfaces should be cleaned, degreased and sanded to ensure an adequate "key" is produced. Remove all loose, flaking material and treat bare areas as new substrate then prepare accordingly. Apply direct on to wood and concrete. On metal use Coo-Var Zinc Phosphate Primer.
Mix well before use. Apply via brush, roller or airless spray.
For Chalkboard Use
To prime your chalkboard, lay a piece of chalk on its side and cover the entire board liberally with chalk. Rub it in with a dry rag and then erase. Chalkboards are porous, so if you do not prime there is a risk the first markings will be there permanently.
Technical Details
| Components: | Single Pack |
| Type: | Solvent Based |
| Finish: | Matt |
| Stock Colours: | Black |
| Tintable: | No |
| VOC Content: | 484 g/L |
| Volume Solids: | 43% |
| Suitable Substrates: | Wood, metal, ironwork, plaster and many more substrates |
| Application Method: | Brush, Roller or Airless Spray |
| Theoretical Coverage: | 9 m2 per litre at 45 microns DFT |
| Wet Film Thickness (WFT): | 110 microns |
| Dry Film Thickness (DFT): | 45 - 50 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 2 hours at 20°C |
| Overcoatable: | After 12 hours or overnight at 20°C |
| Fully Cured: | 5 - 7 days at 20°C |
| Cleaner / Thinner: | Coo-Var Thinners 14 |
| Shelf Life: | 2 years minimum in original unopened containers |
| Packaging: | Available in 1, 2.5 and 5 Litres |
Related Products
Bedec Barn Paint
For feather-edge, waney edge, metal and plastic cladding, fencing, exterior wood, metal, brick and concrete.
From
£37.62
£31.35
Teknos Nordica Matt
A full-matt water-borne acrylate-based paint for wooden surfaces such as wooden cladding, weatherboarding, facia boards etc.
From
£16.73
£13.94
The Traditional Paint Company Traditional Barn Paint
A high performance product providing superior protection and decoration to a variety of external buildings.
From
£52.62
£43.85
Zinsser Allcoat Exterior Satin (Solvent Based)
Suitable for most exterior surfaces. Solvent Based.
From
£97.85
£81.54
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
From
£2.34
£1.95
Coo-Var Masonry Stabiliser Sealer
A binding and sealing solution for degraded and porous masonry.
From
£33.42
£27.85
Zinsser AllWeather Exterior Masonry Paint (Pliolite Based)
A Pliolite Exterior Masonry Paint. Use at low temperatures, -5°C. Showerproof in as little as 20 minutes
From
£78.59
£65.49