International Intersleek 731

SKU
id23952
Parts A and B: UN1263 (Class: 3, Pk Grp: III)
A two pack, silicone elastomer tie coat for new building or maintenance and repair.
Available in 10 Litres
From £1,284.12 £1,070.10
In stock
Only %1 left
Product Description

International Intersleek 731 is a two pack, silicone elastomer tie coat used to promote adhesion between the specified priming system and the Intersleek finish coat.

Best Uses

Intersleek 731 is intended for use to promote adhesion between the specified priming system and the International Paints Intersleek finish coat. It is suitable for both Newbuildings or maintenance and repair.

Application

The recommended method of application is by Airless Spray. Brush application is suitable for small areas only and will require more than one coat. Please Note: This product is not suitable for application by Conventional Spray or Roller.

Ensure all surfaces are clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.

Surface Preparations

Intersleek 731 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination, and Intersleek 731 must be applied within the overcoating intervals specified (consult the relevant product data sheet).

Any areas of breakdown, damage etc. should be prepared to the specified standard (eg. Sa2½ (ISO 8501-1:2007) and primed prior to the application of Intersleek 731.

Technical Details

Suitable Topcoats

Technical Info

Components: Two Components
Type: Elastomeric Tie Coat
Finish: Low Gloss
Stock Colours: Light Pink, Red
Tintable: No
VOC Content: 325 g/lt
Volume Solids: 63% ±2%
Suitable Substrates: Should always be applied over a recommended primer coating scheme
Application Method: Airless Spray, Brush
Theoretical Coverage: 6.3 m²/litre at 100µms dft
Wet Film Thickness (WFT): 159µm
Dry Film Thickness (DFT): 100µm
Induction Time: Not required
Pot Life: 3 hours at 20°C
Touch Dry: 2 hours at 20°C
Overcoatable: Minimum 4.5 hours to max 5 days at 20°C
Hard Dry: 4.5 hours at 20°C
Cleaner / Thinner: Thinner is not recommended. Clean equipment with International GTA007
Shelf Life: 12 months from date of production unopened
Packaging: Available in 10 Litres

Related Products