£9.95 delivery on orders excluding certain products & postcodes *
International Interspeed 6400
SKU
ID26090
UN1263 (Class: 3, Pk Grp: III)
A TBT free, controlled depletion polymer, self polishing antifouling system. For use within an International marine system.
Available in 20 Litres in various stock colours
From
£780.00
£650.00
In stock
Only %1 left
Product Description
International Interspeed 6400 is a TBT free, controlled depletion polymer (CDP) self polishing antifouling system. For use within an International Paints antifouling system.
Best Uses
For use at Newbuilding or Maintenance & Repair. In repair situations Interspeed 6400 can be applied directly over existing antifoulings. For deep sea and coastal use.
Suitable for use at Newbuilding or Maintenance and Repair, for in-service periods of up to 36 months, they can be applied directly over existing antifoulings in good condition.
- Over 60% volume solids - Less waste of paint and increased workability
- Controlled biocide release - Tailored speci cation design with optimum dry lm thickness
- Durable films -Control of mechanical damage
- 363 g/lt VOC - Control of solvent emissions
- Up to 36 months in-service periods - Suitable for varying drydocking intervals
- Surface tolerant - Reduced surface preparation costs
Application
Use in accordance with the standard Worldwide Marine Specifications. All surfaces to be coated should be clean, dry and free from contamination. High pressure fresh water wash or fresh water wash, as appropriate, and remove all oil or grease, soluble contaminants and other foreign matter in accordance with SSPC-SP1 solvent cleaning.
SURFACE PREPARATIONS
NEWBUILDING
Dependent on yard procedures. Consult International Paint. When high pressure fresh water washing at pre-delivery drydockings at newbuilding, consult Promain's Technical Team.
MAJOR REFURBISHMENT
Interspeed 6400 should always be applied over a recommended primer coating scheme. The primer surface should be dry and free from all contamination. Interspeed 6400 must be applied within the overcoating intervals specified for the primer (consult the relevant primer data sheet). Areas of breakdown, damage etc., should be prepared to the specified standard e.g. Sa2½ (ISO 8501-1:2007)) and primed prior to the application of Interspeed 6400.
REPAIR
CDP (Controlled Depletion Polymer) antifoulings can build up a thick leached layer during service which must be removed prior to application of Interspeed 6400. To remove this leached layer, treat the entire area by close high pressure fresh water washing using a fan-jet lance held close to the surface (3,000 p.s.i., 211 kg/cm²) as soon as the vessel enters dock and before it dries out. Consult International Paint for alternative methods of surface preparation. Repair corroded areas with the recommended primer coating scheme and apply Interspeed 6400 within the overcoating interval specified for the primer (consult the relevant primer data sheet). Ensure that the total area is clean and dry, then overcoat with Interspeed 6400. Consult your International Paint representative for specific recommendations.
Technical Details
Approvals and Certifications
When used as part of an approved scheme, this product has the following certification:
- Product recognised by the following classification societies as compliant with the International Convention on the
Control of Harmful Anti-fouling Systems on Ships, 2001 (AFS 2001): - Bureau Veritas
- DNV
- Korean Register of Shipping
- Lloyds Register
Approvals issued by external bodies may be dependent upon formulation and/ or manufacturing site.
Technical Info
| Components: | Single Pack |
| Type: | TBT free, controlled depletion polymer (CDP) self polishing antifouling system. |
| Finish: | N/A |
| Stock Colours: | BQA644-Red, BQA648-Brown, BQA642-Blue, BQA643-Green, BQA649- Black |
| Tintable: | No |
| VOC Content: | 363 g/L |
| Volume Solids: | 60% |
| Suitable Substrates: | Antifouling |
| Application Method: | Airless Spray, Brush, Roller |
| Theoretical Coverage: | 8.0 - 4.0 m2 per litre at 75 - 150 microns DFT, allow appropriate loss factors |
| Wet Film Thickness (WFT): | 125 - 250 microns |
| Dry Film Thickness (DFT): | 75 - 150 microns |
| Induction Time: | - |
| Pot Life: | - |
| Touch Dry: | 4 hours at 5°C |
| Overcoatable: | Between 12 hours and 6 months at 5°C |
| Before Flooding: | 12 hours at 5°C |
| Cleaner / Thinner: | International GTA007. Thinning is not normally required. Consult the local representative for advice during application in extreme conditions. Do not thin more than allowed by local environmental legislation. |
| Shelf Life: | 12 months at 25°C. Subject to re-inspection thereafter. Store in dry, shaded conditions away from sources of heat and ignition. |
| Packaging: | Available in 20 Litres |
Related Products
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
RODO Plastic Paint Stirrer PS380, 380mm
A plastic paint stirring stick for homogenous mixing of paint prior to use.
£2.69
£2.24
International Intershield 300
A 2 part, abrasion resistant pure epoxy. Provides excellent long term anti-corrosive protection offshore or below water.
From
£398.16
£331.80
International Thinner GTA007
Suitable for thinning paints and equipment cleaning from International Paints.
From
£58.87
£49.06
International Intersheen 579
A fast drying, single pack modified acrylic cosmetic finish for above the waterline in marine environments.
From
£93.66
£78.05
RODO Blackrock Lightweight PU Gripper Gloves
Extremely lightweight gloves with PU coated palms and fingers for exceptional dexterity and grip in wet and dry conditions.
From
£0.77
£0.64
Hempel Antifouling Olympic 86951
A high solids, tin-free, self-smoothening and self-polishing antifouling.
From
£701.82
£584.85
International Interswift 6600
A TBT free anti-fouling from International Paints. Can be applied down to -5°C.
From
£1,624.25
£1,353.54