C2 Environments

A two part polyamide cured, high molecular weight epoxy coating, designed as a high build, all purpose coating for new construction.

A 2 pack amine cured epoxy coating for new construction where short dry to handle and over coating times are required.

A 2 pack epoxy enamel which offers good gloss and a hard durable film to bare and sand blasted steel.

A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail approved. Highways Approved Item No 168

A scratch resistant mirror finish, non yellowing gloss boat paint for hulls and decks.

A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.

A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...

A single component oxidatively drying alkyd coating for engines, topside, deck and superstructure.

A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...

A solvent based 2 pack PU applied without a primer to glass splash backs, plant, agricultural equipment, plastics etc.

Apply wet on wet to bare or galvanised steel, phosphate steel, light alloys, stainless or previously coated steel and GRP.

Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.

A quick drying, tough, flexible paint designed for use on metal surfaces.

A high performance, modified alkyd metal primer used as an anti-corrosive primer on iron and steel.

An epoxy powder coating particularly suitable for storage tanks for the water industry.

An easy to use quick drying gloss finish for overcoating of primed steel substrates.

A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...

A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.

A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.

A hard wearing, long lasting priming barrier for use in severe corrosive environment systems.

A zinc phosphate 2 pack epoxy paint for use in corrosive environments within a Hempel coatings system.

A quick drying 1 pack acrylic resin based topcoat for use as a finishing coat for application to steel or concrete.

A universal, all round, new construction coating. Used as primer, mid coat, finish coat or as single coat system.

A two component, low VOC, high solids, fast curing epoxy primer / finish containing zinc phosphate anti-corrosive pigmentation.

Cathodic Protection for Metal Teamac Zinc Rich Primer P/201/252 for metal, cold galvanising.

A two pack epoxy anti-corrosive primer for application to steel which is clean and free from scale and / or rust.

A high solids, tin free, PU with fast drying and high gloss attributes for use where long term exterior gloss and colour retention is required.

A multi functional epoxy coating suitable for the protection of steelwork in a range of exposure environments from C1 to C5.