£9.95 delivery on orders excluding certain products & postcodes *
Centrecoat Line Marking Paint has been developed over many years and is manufactured in the UK, following the new most stringent quality controls. Offering optimum performance, it is proven to be a hard wearing robust road line paint that will provide you with years of service.
The new ST1 Road Marking Paint has been developed to offer superior adhesion, extended durability and is now shower proof within 30 seconds of application. This has proven to be a game changer in road line paint as it means it can be applied to a damp road surface unlike chlorinated rubber or epoxy road line paints that can only be applied to dry substrates.
A primer for steel, galvanised steel, aluminium, and unglazed ceramic tiles. Use with Centrecoat MMA products.
A general purpose primer for Centrecoat MMA coatings used on concrete, block paving, mortars, and screeds.
Used as a guide for marking straight lines on concrete, asphalt, tarmac and brick surfaces.
A 2 pack, fast curing, clear sealer used as the finish coat for flooring products from our MMA range.
Freezer and Cold Room Repair Mortar. Rapid heavy loading repairs to concrete. For low temperatures down to-30°C.
A 2 pack, fast curing, clear sealer used as the finish coat for other flooring products in the MMA Fire Rated range.
A heavy duty fast return to service 2 pack line marking paint that offers up to 20 years life expectancy.
Water based Line Marking Paint for Asphalt, Tarmac and Concrete parking bays, EV charging, centre lines and edge lines, symbols and walkways.
For interior and exterior hard surface line marking including sports courts, playgrounds and factory floors.
Ballotini Glass Beads for line marking and Thermoplastic striping for Roads and Car Parks.
A hand held applicator use for applying MMA paints and hot Thermoplastic material.
Replacement dribble bars and width alteration on the Centrecoat Line Marking Machine.
Centrecoat replacement Sponges for use with the Centrecoat Line Marking Machine.
A 3 pack methacrylate resin system. Imparts toughness, resilience and waterproofing properties to the cured membrane.
A fast curing chemical resistant floor coating for wet areas, cures at low temperatures with a hygienic finish.
A three pack methacrylate resin coating suitable for use in freezer grade environments down to -40°C.
A fast curing, low temperature coating for industrial freezers, cold stores and refrigerators, curing to -20°C.
A two pack primer formulated to prepare oil contaminated floors prior to application of subsequent Centrecoat floor coatings.
A single coat, fast return to surface, slip resistant floor package, suitable to cover 5m2 of surface area.
A single pack, durable, polyurethane floor coating. 00-A-05 available for next day delivery.
A 2 pack, fast curing, clear sealer for use as the finish coat for MMA flooring products in the Centrecoat MMA FG Freezer Grade range.
This product is now discontinued. See Soppec Reflect Light Aerosol as a potential alternative.
The World's toughest aisle marking system, instantly applied with no fuss.
Developed as a substrate specific primer for tarmac and asphalt, being used prior to any suitable Centrecoat MMA product.
Overbanding Tape from Centrecoat for asphalt roads to prevent water ingress and fretting.
Developed as a primer for damp concrete, being used prior to any of the Centrecoat MMA product range.
Right angle corners for the World's toughest aisle marking system, instantly applied with no fuss.
A two pack, fast curing flexible coating for line marking paint for concrete surfaces.