£9.95 delivery on orders excluding certain products & postcodes *
Jotun saw an enormous increase in the size of the whaling fleet at the turn of the century and realized the potential in producing the marine coating he was selling himself, Gleditsch purchased an oil mill that was struggling and set about turning it into a paint manufacturing plant. In 1931 Jotun purchased Arcanol, a paint company that were producing a red lead based paint that offered extremely good rust-inhibiting properties, this paint coating proved to be the first real success for Jotun in the rapidly growing marine protective coatings industry. Jotun soon formulated an antifouling which meant that boats and ships were able to spend longer at sea before the necessity for cleaning in dry dock, this was typically up to four years.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A single pack polysiloxane topcoat formulated to give a cosmetic finish with superior colour and gloss retention. NORSOK approved.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance and available in a choice of colours.
A two component polyamide cured epoxy coating. To be used as topcoat in atmospheric environments.
A two component surface tolerant, long lasting corrosion protection for carbon steel and aged coatings found in severe environments.
A fast drying, two part amine cured epoxy zinc phosphate pigmented, high solids, high build product formulated for exposed structural steel.
A two pack acrylic isocyanate free topcoat with good gloss retention. Highways Approved Item No.168.
A hard wearing top coat for use in aggressive atmospheric exposure. Network Rail/Railtrack approved. Highways Approved Item No.169.
For application to steel where blast cleaning may not be possible, excellent corrosion resistance.
A two component chemically curing high gloss aliphatic acrylic polyurethane coating that offers resistance to UV degradation and good chemical resista...
A one part oxidatively drying alkyd coating, that is a fast drying, high build, zinc phosphate pigmented primer or mid coat in atmospheric environment...
Low temperature curing, two component coating, providing protection in atmospheric and immersed environments.
A low film build anti-corrosive primer for application to steel substrates. Network Rail/Railtrack approved. Highways Approved Item No. 109
Formally Jotun Penguard Tie Coat. A two component, polyamide cured, high molecular weight epoxy coating, specially designed as a tie coat / sealer.
A fast drying, anti corrosive, high solids 2 part polyamide cured zinc rich epoxy coating.
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
A two component MIO micaceous iron oxide pigmented amine curing epoxy. Highways Approved Item No.112.
A two component polyamide highly pigmented zinc phosphate coating. Highways Approved Item No. 110.
A two-pack epoxy paint coating that is reinforced with glass flake. Highways Approved Item No.123.
A one component physically drying silicone acrylic coating that is heat resistant up to 600°C.
A 2 pack polyamide cured vinyl epoxy based coating. Formulated as a tie coat between epoxy primers and anti-fouling systems.