£9.95 delivery on orders excluding certain products & postcodes *
Carboline | Hempel | International Paints | Jotun | PPG | Sherwin Williams
Guide To Working In Confined Spaces
A 3 part, high solids, surface tolerant, abrasion resistant anti-corrosive epoxy coating with a selected blend of fused aluminium oxide.
A two component fast drying coating. Can be applied on steel, aluminium and concrete at sub zero surface temperatures.
A self-primed, surface tolerant coating with low temperature curing properties, low VOC and high film build.
A protective enamel coating for structures found in severe atmospheric conditions and is Network Rail approved.
A one pack coating that contains 96% zinc to provide cold galvanizing cathodic protection of ferrous metals.
A high build, 2 pack epoxy, zinc phosphate primer / buildcoat for the anti corrosive protection of steel.
A versatile high performance polyamide cured epoxy designed to fulfil the needs of both new construction and maintenance painting to steel, aluminium ...
A self curing solvent based zinc silicate coating for the protection of blast cleaned steel surfaces up to 400°C.
This product is now discontinued. See Sherwin Williams Zinc Clad IV EU as a potential alternative.
A two pack isocyanate free finish based on an acrylic epoxy binder system. NORSOK M501 Rev 6 System 1.
A high solids 2 pack epoxy, pigmented with MIO (Micaceous Iron Oxide) certified under Highways Agency No112.
An 2 pack epoxy zinc rich anti corrosive primer for the protection of steel surfaces.
A 2 pack, solvent free, thick film epoxy exterior intumescent coating that provides passive hydrocarbon fire protection for up to 4 hours on structura...
A 1 pack inert multipolymeric matrix coating that outperforms alternatives in combating CUI or in high heat applications.
A flake filled MIO amine cured epoxy phenolic novolac formulated for use under thermal insulation at elevated or cryogenic temperatures.
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
A two component epoxy coating for carbon and shop primed steel and coated surfaces. Can be applied at sub zero surface temperatures.
A 2 pack high build anti-corrosive epoxy mastic for high film thicknesses for smaller maintenance and repair jobs.
A corrosion, abrasion, chemical and water resistant coating, suitable for interior and exterior use.
A 2 pack structural steel and piping coating that will continue to cure while immersed.
A two pack, high solids, high gloss topcoat for industrial use in offshore corrosive environments. Cures down to 0°C.
Immersion grade coating for steel and stainless steel. Cures down to 5°C. Tintable to a huge range of RAL and BS shades.
A 1 pack silicone high performance finish for areas exposed to extreme temperatures. Suitable for service from 204°C - 540°C.
Offers exceptional barrier protection and resistance to wet/dry cycling at elevated temperatures.
An ultra high solids epoxy that is designed as a liner for potable water. FDA approved.
Rapid / low temperature curing inorganic zinc product suitable for C3 - CX and immersion environments.
A fast-curing, heavy duty, high-build anti-corrosive coating for marine and other corrosive environments.
A versatile tank lining suitable for low temperature application down to 2°C. NORSOK 7a Approved.