£9.95 delivery on orders excluding certain products & postcodes *
This product is part of the Network Rail/Railtrack RT98 System 24.
Jotun Jotamastic 87 Aluminium has a successful track record in providing long lasting corrosion protection in the most severe environments. All season applicable up to 300 microns in one coat, giving the opportunity for exceptional protection without the necessity for an additional top/sealer coat. Jotamastic 87 Aluminium Standard offers very good adhesion to all substrates and compatibility in typical maintenance situations.
It is a low VOC and solvent emission paint coating and is suitable for submersion without a topcoat. Jotamastic 87 Aluminium
Jotamastic 87 Aluminium Standard is designed for use as a maintenance and repair product for marine and offshore environments. It is suitable for marine and water ballast tanks and for the protection of structures in offshore environments, such as refineries. Other examples are power plants, bridges, buildings and general structural steel.
Jotamastic 87 Aluminium Standard requires limited surface preparation. Application should be by airless spray. A brush is recommended for stripe coating and small areas and a roller may be used for small areas too. Additional care must be taken to achieve the specified dry film thickness, when applying Jotamastic 87 Standard by brush or roller.
Jotamastic 87 Aluminium provides long lasting protection in environments with high corrosivity. It is suitable for properly prepared carbon steel and aged coating and surfaces. Jotamastic 87 Aluminium can be applied at sub zero surface temperatures.
Components: | Two Part |
Type: | Polyamine cured epoxy mastic coating |
Finish: | Semi Gloss |
Stock Colours: | Aluminium, Aluminium Red Toned |
Tintable: | No |
VOC Content: | 212.0g per litre |
Volume Solids: | 87% |
Suitable Substrates: | Carbon steel and aged coating surfaces |
Application Method: | Airless Spray, Brush or Roller |
Theoretical Coverage: | 5.8 - 2.9m2 per litre |
Wet Film Thickness (WFT): | 170 - 345 microns |
Dry Film Thickness (DFT): | 150 - 300 microns |
Induction Time: | 10 mins at 23°C |
Pot Life: | 1.5 hours at 23°C |
Touch Dry: | 8 hours at 10°C |
Overcoatable: | 24 hours at 10°C |
Fully Cured: | 14 days at 10°C |
Cleaner / Thinner: | Jotun Thinner No. 17 |
Shelf Life: | 48 months |
Packaging: | Available in 20 Litres |